High lumen Epistar chip 1-3W LEDs

High lumen Epistar chip 1-3W LEDs 1.Power Consumption:3W 2.Luminous:220-240lm 3.Color Tempreture:3000-3500K

High lumen Epistar chip 1-3W LEDs 

Specifications

Model No.

Chips Size

Chips quantity

Power

Lumen

Voltage

CT

MXD-PC004WRG1-001

24*24MIL

2PCS

1W

80-100LM

3.2-3.6V

3000K-3500K

MXD-PC002WEG1-002

20*38MIL

1PCS

1W

70-80LM

3.3-3.8V

5500K-8000K

MXD-PC002WRG1-002

20*38MIL

1PCS

1W

70-80LM

3.3-3.8V

3000K-3500K

MXD-PC002WEG1-004

20*40MIL

1PCS

1W

70-80LM

3.6-4.0V

5500K-8000K

MXD-PC002WRG1-004

20*40MIL

1PCS

1W

70-80LM

3.6-4.0V

3000K-3500K

MXD-PC004WEG1-003

45*45MIL

1PCS

3W

220-240LM

3.3-3.6V

5500K-8000K

MXD-PC004WRG1-003

45*45MIL

1PCS

1W

110-120LM

3.3-3.6V

3000K-3500K

Features:

1.MXD is a professional manufacturer of power led,led diode,with experience of 6 years.2.Class A quality with 2 years warranty for all items.3.Original Epistar/Bridgelux chips with 100% class A grade.4.All leds 100% QA passed before shipped.5.Fully automatic production machine and quality checking machines insure great quality of goods and fast delivery.

Applications:

Indoor and outdoor illuminationInterior automotive lightingReading lightSignal and symbol luminariesMarker lightsArchitectural illuminationStreet lamps,spotlights,architectural lighting landscapes,lighting exterior illumination and so on.Wall wash lamps,underwater lamps,decorative illumination and so on.Underground lamps,reading lamps,emergency lights,interior illuminationMiners lamps,flashlights,car lamps traffic signals,indicating lamps.

Main advantage of MXD

1.Have our own packaging technology,can control all details with good quality and high brightness.2.LED with low lighting attenuation.3.Special design good for heating output.4.We are professional manufacturer with 12 years experience in LEDs.Quality is 100% guaranteed.

Notice:

1.The welding temperature should be lower than 260°c and the welding operation should be finished within 5 seconds.The welding point should be 2.5mm above the botton of LED gel and the electricion must be earth grounded.2.Please do not weld LED in live working.3.Generally,please avoid the LED working at temperature over 80°c,and heat disspation must be properly performed if the high temperature operation is necessory.4.Static eletricityA.All  of the workers contacted with the blue,green,white and purple LED must be well protected against static electricity.Such as,wear electrostatic ring,electrostatic clothes,electrostatic shoes and so on.B.When wired electrostatic ring is wired,the electrostatics ring should be earth groundted,as well as the pertential difference between the ground line and the city ground line should not exceeded 5V or the rasistance should not  exceed 25Ω respectively.C.The ground line should be installed for eperation equipement and operation desks.5.When the LED is used,the currency should not exceed 20mA,and the most suitable currency in 15-19mA.6.The device should be not too close to heating element,and the operational conditions must not exceed the stipulated limits.7.When the LED is installed,the conduit is suggested to use for location.The LED should be not installed when the pin has been deformed.8.Avoid the LED being shaken or disturbed by outer forces until the welding temperature return to normal.9.The ultrasonic machine is suggestd to use for cleaning LED,if the ultrasonic machine is not available,the alcohol can be substituted for it,however,the cleaning time should be controlled within one minute,Note:do not use organic solvents(such as acetone,thinner)to clean or wipe the LED gel,which will cause the abnormal luminescence and fracture in the gel,finally,resuit in the release and crack of the gold thread in the LED rom the crystal wafer.10.The LED should be not too close to gel at the bending or folding corner,and should keep the distance above 2-3mm with the gel,otherwise the stent in the LED will be seperated fron the gold thread.

   

High lumen Epistar chip 1-3W LEDs